Exclusive US Distributor – Sales, Service & Support

What is Internal Oscillation and why is it such a great feature?

Internal oscillation means the machine does not move when it shoots balls. Spinfire was the first consumer tennis ball machine to have this feature way back in 2010. This is a much sought after feature as knowing which way to run when the ball shoots in the random modes will not make you a better player. It’s cheating. Serena Williams would keep winning Grand Slams if her opponent told her which way to run. The machine should not warn you either. Other benefits of Internal Oscillation are 1) less wear & tear as only the internal machine moves not 40 lbs of machine & 20 lbs of balls; 2) it makes the machine quieter as the mechanism is completely internal; and 3) the movement is faster.

 

What is the difference between the SLA (Sealed Lead Acid) and Lithium Battery options?

the differences between the 2 batteries:

SLA –                    Lithium

Charge/Discharge cycles                 400+                    3,000+

Weight                                                 14 lbs                     5 lbs

Warranty                                             6 months              2 years

Charging Time from empty             11 hours                <4.5 hours with fast charger, 9 hours with standard

Other considerations:

The SLA battery should not be left sitting uncharged as it can seriously degrade in a matter of weeks. The lithium battery does not have this issue.

The top speed of the machine decreases slightly with the SLA battery as the charge is being used up. This does not happen with the lithium battery.

Over 85% of our customers now choose the lithium battery. If you have the budget it is definitely the preferable option.

How do I choose whether to opt for the Internal vs External battery?

It depends on where your tennis court is located. If you drive to a tennis court you may want to purchase the External Battery Model, which includes an external battery pack for the battery. Then you just plug the battery pack into the machine to power it. That allows you to leave the machine in the car and only bring in the battery to charge. It also makes the machine lighter to lift in and out of the car at the court without a battery inside.

If you are fortunate enough to own your own tennis court, have one close by enough that you can just walk to it or if you leave your tennis ball machine at a club you may want to choose the Internal Battery Model. You then just pull it like luggage to the court and back to an outlet when you are done in order to charge it.  If you drive to a court with this model, note that you must bring the entire machine to an outlet to charge it when you get home vs. just bringing in an external battery pack to charge.

Can the Spinfire be powered from an electrical outlet?

Yes. You can buy the AC Only Model which includes an AC Adapter which you can plug into an electrical outlet to power the machine. A battery is not included with that model but if you want both power options you can buy an internal or external battery model and add an AC Adapter to the order for an extra charge.  o do that, or you can buy a battery model and add an AC Adapter to the order. If you buy a battery model and you later find you want to power it from an outlet you can always purchase the AC Adapter later and there is no modifications required to use it. Just plug it into the machine.

Can the Spinfire be used with both a battery and AC Adapter?

Yes. You can purchase an internal or external battery model and than add an AC Adapter to your order. You can also purchase the AC Adapter later if you buy a battery model or a battery later if you purchase the AC Only model

If I buy a battery model can I guy the AC Adapter later and will it work?

Yes.

Can I purchase the SLA Battery Model and then upgrade to a lithium battery later?

Yes. The connections are the same. Just unscrew the 2 wires from the battery, lift the battery out, insert the lithium battery and re-attach the 2 wires.

Why do you not offer an Internal SLA Battery Model but only a Internal Lithium Battery Model?

There is a variety of reasons for this

1. When we offered it there was almost no demand;

2. The SLA battery is very heavy at 14 lbs and therefore if it is installed internally it makes the Spinfire significantly heavier than the lithium battery installed internally does;

3. The SLA battery has significantly fewer charge/discharge cycles at approximately 400+, compared to the lithium which is 3,000+. If it is installed internally the machine must be taken apart to replace it which takes up to an hour. The lithium battery will not have to be replaced for many years, eliminating the requirement to take the machine apart to replace the battery on average every 2-3 years as is the case with the SLA battery.

4. If the external SLA battery is a bit tempermental. If it is not kept charged (after which you can disconnect it) but left without a charge for even a few weeks then it will significantly degrade and perhaps fail to ever hold a charge again. This cannot be corrected once it happens.  This then requires the machine to be taken apart prematurely to replace the battery. The manual advises to charge the battery once a month to avoid that.

Can a user convert an Internal Battery Model to External and vice-versa?

Yes. Just email us for instructions. For Internal Battery Model owners you will need to buy the external battery case and cables here.

 

 

 

What is the size & weight of the Spinfire?

Size with Ball Hopper stored inverted on machine: 25″L * 15.5″W * 18.5″ H

Size with Ball Hopper stored upright on machine: 25″L * 15.5″W * 31″ H

Weight: 40 lb. An internal lithium battery will add 5 lbs.

Will the Spinfire fit in my car trunk?

With thousands of car models on the market we cannot ensure whether it will or not. It does in some but not all, but of course it will easily fit in the back of an SUV. However it will always fit in the back or front seat and there are no sharp edges on the bottom that will damage your car set. One way to test if it will fit in the trunk is to make a box of the size listed in the question above and see it it will fit.

What is the size & weight of the shipping box?

Box size: 28″L * 17″W * 20″ H

Box weights:

Internal or External Lithium Battery Model – 60 lb

AC Only Model – 54 lb

SLA Battery Model – 68 lb

Accessories such as the Lid, Cover & Full Cover weigh less than 1/2 lbs each. The Ball Bag and AC Adapter each weigh 1.5 lb.

Can I bring the Spinfire on a plane?

Indeed you can. It would have to be checked into cargo ad likely incur an extra charge. However, you cannot include the lithium battery. It has to be shipped via ground. Only the SLA battery is allowed. You can always purchase a lithium battery at your destination or order one from us which we would ship to your destination via air from our supplier if ground is not possible due to your destination.

Can I purchase an extra Slimline Remote?

Yes, You can find them on our website here.

I noticed my Slimline Remote (not the app) was operating a Spinfire on an adjacent court too. How can that be avoided?

The Spinfire Slimline Remote can be locked to your machine by pressing the DRILL button on the remote and then the POWER button and holding both and then turning on the machine. You will get a message that the remote has been locked to your machine online and so it will not operate other machines. This should only be done if you find yourself in the situation described as it cannot be unlocked. The app is always locked to the machine due to the fact you have to always connect it using Bluetooth on start up.

I want to use the additional drills on the smartphone app but find it uncomfortable to have it in my tennis shorts while running around on the court hitting balls. How can I avoid that?

Very easily. Just press the button for the drill you want to upload to the machine and then put the phone away on the bench or in your racquet bag. Then start and stop the drill using the PLAY button on the slimline remote. Retreive the smartphone when you want to choose a different drill or access one of the drills that are on the slimline remote. Alternatively, if you press and hold the PLAY button on the app it will provide you with various delays until the ball starts shooting. That will give you time to put the phone away. 

What is the setup procedure for the machine when I first get it?

Very simple. Flip the hopper, pour in the balls, make sure you have the master switch set to the right power source (internal or external battery or AC) and press the Power button. We suggest you then press the Feed button and shoot a few balls in order to ensure you have the machine pointed directly down the centerline. If not then just adjust the machine with your hands. That way your drills won’t be skewed to one side or the other. Of course you can place the Spinfire anywhere on the court that you like such as in one corner and pointed at the Ad or the Deuce side, but ensure you don’t have the width of ball throw to wide so that the balls do not end up always shooting into an adjacent court.

Is it worth getting the extended 5-Year Warranty?

The 5-Year Warranty is an insurance policy. Some consumers always by them, some never do and some base it on the value of the item. While issues with the Spinfire are very low and defedts typically reveal themselves early on during the initial 2-Year Warranty period, it is a consumer product that has 5 motors, switches, a membrane touch panel, Slimline Remote and a circuit board and it cannot be predicted whether you will be unlucky and have a part that needs to be replaced or the machine to otherwise br serviced.

Can I purchase an extra Slimline Remote?

Yes, You can find them on our website here.

Can the Spinfire be used on clay courts?

Yes. The Spinfire can be used on all court surfaces including clay, grass and hard court. You may find that with clay courts the machine can get a bit more dirty inside due to the clay accumulation. However, that is easily dealt with by vacuuming it out.

Are parts available for the Spinfire?

Yes. We have parts available for the Spinfire going back to the first introduction in 2010. Some of the more common parts are listed on the Parts section here. For other parts just email us and we can provide pricing. Most parts are always available.

What is the cost of shipping?

We charge a flat rate of $69 to ship a machine anywhere in te continental USA. Hawaii, Puerto Rico and Alaska incur an additional charge. A 1, 2 or 3 pack of balls are all the same shipping cost of $20. Our shipping charge is a fraction of what it costs us to ship the item. Note that ball machines are shipped with an adult signature required upon delivery but balls are not .

What do the 2 & 5-Year Warranties cover?

Both warranties cover all of the parts on the machine for the 2 or 5-Year period after delivery, wear & tear & misuse excepted. There are no exclusions except the following: The SLA battery is covered for 6 months under either warranty and the Dakota Lithium brand battery is covered for 11 years by Dakota Lithium (dakotalithium.com) not Spinfire. Any other brand of lithium battery we sell is covered for 2 years under either warranty.

Note that no other tennis ball machine vendor covers all the parts on their tennis ball machine like Spinfire does. For example, Lobster, Titan & Spinshot only cover the throwing wheels for 6 months yet they get the most use of any part on the machine! Spinfire does not limit your warranty in this way as we stand behind the quality of our throwing wheels without limitation just like the rest of the machine.

No warranty card is required to be returned in order to validate your waranty, unlike our competition. We feel that this is an unnecessary requirement because your purchase should guarantee you the warranty without you having to go through more hurdles to validate it. Note that the warranty is not transferable, which is consistent among consumer products.

Full details of the warranty can be found here.

I am having trouble deciding whether to purchase the internal or external battery. Which is better?

External Battery: One of the main reasons for choosing the external battery is to be able to leave the Spinfire in your car when you return from the court and only bring in the battery to charge. It also makes the machine about 7 lbs lighter if there is no battery inside the machine. More than 80% of our customers choose the External Battery Model.

Internal Battery: This battery is chosen primarily by those who either walk to a court that is close by to their home, leave their Spinfire at a tennis club or are fortunate enough to own their own court. They then can just roll the machine back and forth to an outlet. It an also be more convenient for some as the battery doesn’t have to be carried separately, although it is quite light and small and has a hand strap and shoulder strap.

I have an old Spinfire with a white control panel, not a purple one. Can I upgrade it to use the new smartphone app?

Unfortunately not. Only redesigned machines which can be identified as they have a purple control panel and were shipped from late 2020 and onwards can be upgraded. Machines shipped from about June 2024 and on do not need to be upgraded as they have the new circuit board with Bluetooth. To check whethe your machine with a purple control panel has the newer circuit board remove the 4 screws on it, lift it out and see if it has a USB port on the back. If it does it can use the smartphone app. The App Guide and App can be downloaded here.

How long should my Spinfire tennis ball machine last?

The best answer to that is as long as parts are available if anything should ever go wrong. We have machines still being used in the field 15 years later from the time the Spinfire was first introduced in 2010. Parts that fail are rare but if it happens we stock a full complement of replacements and video and text instructions that allow users to easily DIY replace the part. In addition machines can be shipped back to us and we can service them for the extra cost of the labor.

As the Spinfire has manu fewer parts that any other ball machine on the marketplace, being fully digital and sensorless, failure rate for the machine while not zero is very low. You can also trust us to be available 365 days a year, including weekends, holidays and after business hours (via email, voicemail and call back) to provide you with very responsive customer service and support. There is no other vendor of consumer products, large or small, nevermind only ball machine vendors, who provide that level of service.

 

 

How long will the SLA or the Lithium Battery last?

SLA – 3-8 hours, 400 charge/discharge cycles

Dakota Lithiu – 4-10 hours, 3,000+ charge discharge cycles

Faster ball speeds and shorter interval between balls taxes the battery more.

 

Can the battery get overcharged?

No. Both the SLA and lithium battery charges we provide are intelligent chargers and will provide a trickle charge once the battery is fully charged. However you might want to detach the charger once the battery is fully charged, signified by the LED on the charger transformer changing from red to green, once it is fully charged. Otherwise you are using up cycles of the battery as it always loses charge over time and then gets automatically recharged by the charger.

 

Is the AC Adapter also a battery charger.

No. It should only be used to power the machine from an electrical outlet. The charger you receive with your battery should only be used to charge it. You can easily identify it if you have both a battery charger and an AC Adapter because the charger has a much smaller transformer.

 

What does the external battery include?

The case, battery cables for charging and for powering the machine and a vinyl battery case with hand and shoulder straps for the battery to be stored and transported in. At the court simply plug the proper cable into the machine.

 

Do I have to use pressurelss balls with the Spinfire?

Absolutely not. You use any ball with the machine, pressurized or pressureless, except for the larger children’s ball (described as the red dot or red ball) as it is too large to fit between the throwing wheels on any tennis ball machine. Pressureless balls have an advantage over pressureless as they do not go flat like pressurized balls. Therefore, over the long run because you don’t have to keep purchasing new balls, not to mention opening a whole bunch of ball cans, so they are much more cost effective. Our SetPoint Bounce balls are the same weight, color, diameter and have the same ball fuzz as regular pressurized balls. They may feel a bit different as the rubber inside the ball is a bit thicker than a pressurized ball in order to eliminate the requirement for air pressure. For some they may feel a bit heavier when hitting but not for all.

Do I have to buy the extended 5-Year Warranty when I buy the machine or can I buy it later?

We are the only ball machine vendor that does indeed allow you to buy it later after you have purchased the machine. You have up 6 weeks to do so. We send a reminder out via email to notify you of that option.

 

Does the smartphone app cost extra?

No and in fact we are the only ball machine vendor in thw world that provides you with both a handheld dedicated remote and a smartphone app at no extra charge! Therefore you have 4 ways to control your machne: 1) Smartphone App; 2) Smartwatch app (iWatch with Android Wear soon to follow); 3) Slimline Remote; and 4) Machine control panel. No other ball machine has this degree of operational versatility!

 

Can a Spinfire Pro 2 Tennis Ball Machine be used for Spinfire Pro 2 Pickleball Machine used for tennis?

The Spinfire Pro 2 Tennis Ball Machine can be converted to be used for Pickleball and vice versa for the Spinfire Pro 2 Pickleball Machine. Ths requires the purchase of the Tennis Conversion Kit or the Pickleball Conversion Kit as the case may be. All current models shipping from Jan 1, 2025 are convertible, including some before that (call for information). Also, the V1 version of the Spinfire Pro 2 Tennis Ball machine with the white control panel that was sold before the fall of 2020 can be converted to Pickleball. The conversion kit is required because the tennis ball throwing wheels wheels are too large a diameter for the Pickleball to pass through and the latter are to small for the tennis ball to be grabbed by the wheels and be shot. The conversion kit includes the required wheels for each sport and can be easily installed without even taking the cover off the machine. 

What maintenance is required with the Spinfire?

Not much. Wipe down the wheels with a very lightly moistened cloth if you find debris stuck to it and vacuum out any ball fuzz and debris if it becomes obvious. Perhaps once every 6 months remove the control panel, let it hang out and blow air from the back out through the front using a blower. That will dislodge any ball fuzz or debris that was not vacuumed out otherwise. At that time check for any balls that entered the machine without you noticing. You might be surprised to find some!

Can the Spinfire Pro 2 be converted to the Spinfire Pickleball and vice-versa?

No, as the machines have different throwing wheels, different size chutes and drop holes. A Pickleball is also too large shoot in between the larger Spinfire Pro 2 tennis ball machine throwing wheels.

What is the return policy?

If you wish to return your machine for a refund please call us within 30 days of delivery. We charge a restocking fee of 10% of the cost of the order if the machine is received back in like new condition. Otherwise there can be an additional charge. Not all items are returnable for refund, such as opened ball packages and batteries. Please click here to see the complete terms and conditions.